macdull1024@hotmail.com

86 917 3555346 ext608

Product Categories

Baoji AATI New Metal Co.,Ltd

Add:No.4 Baoling Road, Baoji, Shaanxi, China

Phone:+86 917 3555346 ext608

Fax:+86 917 3555978

Contacts:IVY

Mobile:+86 18391763451

E-Mail:macdull1024@hotmail.com

bjaati@sina.com

Titanium-copper composite bar performance Aug 23, 2017

Titanium-copper composite bar performance: titanium copper composite rod as a metal anode of the main components, its role has the following three points:


A: support the anode; titanium copper composite rod has a certain strength and bending resistance, composite bar yield strength of 128MPa, fully meet the production design requirements.


Two: excellent conductivity; the use of explosion + rolling production process so that titanium can be completely close composite, does not produce delamination and therefore has good electrical conductivity, composite strength of 135Mpa, and micro resistance of 7.77 × 10-6Ω.


Three: corrosion resistance, titanium copper composite bar directly with the outer layer of contact with the electrolyte, the outer layer of titanium has excellent corrosion resistance (see table), its life than other materials electrode 10 times longer.


Implementation of the standard: GB / T12769-2003


Coating materials: titanium Ti, nickel Ni, zirconium Zr, stainless steel (316L) and so on


Base material: copper (T2), oxygen-free copper (TU2), aluminum (AL) and so on


End face shape and specifications (mm)


Round: φ (2 ~ 80) × (0.5 ~ 3.0)


Drum: φ (25,27,29,32,34) × 14 × (1.0 ~ 2.0)


Square: side length (10 ~ 40) 5


Flat: long (10 ~ 100) × width (10 ~ 30)


Fillet transition R (3 ~ 5)


Titanium copper composite copper chemical composition should be consistent with the corresponding grade GB / T5231 requirements, titanium chemical composition should be consistent with GB / T15073 or GB / T3620 the corresponding grade requirements. Titanium-copper composite bar inspection using ultrasonic flaw detection